Veritas 14 Narrow PM-V11 Bench Chisel

Description:

This chisel is milled from PM-V11 steel (Rc61-63), an innovative proprietary alloy. This metals micro-structure makes it extremely durable, so it can withstand the impact of heavy chopping cuts without chipping or deforming as readily as other tool steels, even at bevel angles as low as 20. Highly wear resistant, the edge typically lasts at least twice as long in use as an A2 blade before it needs sharpening, yet it's as easy to sharpen as A2 steel using common abrasive media such as water stones.
The chisel blades taper from shoulder to tip for strength and rigidity, and have parallel sides and true bevel edges for clearance and minimal friction when working into an angled corner or a tight recess. To ensure that the face of each blade is both smooth and true, the chisels are lapped flat.
The blade and handle are connected with a tang and a socket-like stainless-steel ferrule that seats directly onto the shoulder of the blade. Flats on the tang prevent the handle from rolling. Each chisel is superbly balanced, with the center of gravity close to the tang/socket connection.
The hard maple handle has been torrefied, a heating process that changes the structure of the wood at the cellular level, stabilizing it against swelling and shrinkage caused by humidity changes. Contoured to fit the hand nicely, the handle has a domed end that resists chipping from glancing mallet blows.
Made in Canada.