Description:
DISCONTINUED AND OUT OF STOCK
Milwaukee 0928-23 Specifications:
Voltage: 28V
Stroke Length: 1-1/8"
Sawzall Speed: 0-2,000/0-3,000 spm
Drill/Driver Speed: 0-600/0-1800 rpm
Torque: 600 in. lbs
No Load BPM: 0-9000/0-27,000
Chuck Size: 1/2"
Clutch Settings: 20
Work Light Run-Time: 5 hours
Milwaukee 0928-23 Includes:
28V Sawzall Recip Saw
28V 1/2" Hammer-Drill/Driver (0724-20)
28V Work Light (49-24-0185)
(2) 28V Lithium-Ion Battery Packs (48-11-2830)
One-Hour Charger (48-59-2801)
(2) Sawzall Blades
Side Handle
Clip-Lok
Bit
Contractor Bag
Milwaukee 0928-23 Features
Consistent power from the first cut to the last
1-1/8" stroke for extremely fast cutting
Variable Speed trigger: 0-2000/0-3000spm
Exclusive gear protecting clutch
Heavy-duty 2 speed gear box: 0-600/0-1800rpm, 0-9000/0-27000bpm
Consistent power from the first hole to the last
600 in. lbs. of torque
Ratcheting, single-sleeve chuck with carbide jaws
Clip-Lok system secures tool to belt with one hand
Clip-Lok System-ready
Faceted reflector, 140 pivoting head
5 Hours of run time on single charge
Up to 2X the run time of 18V tools
Delivers up to 40-50% more power
28 volts of power at 18 volt battery weight
Convenient battery fuel gauge shows charge level
V28 weighs in...light
Youd think a 28-volt system with heavy-duty power would weigh almost twice as much as an 18-volt system. Not so, says Meyer. The V28 technology is so powerful and the weight of a 3.0 amp-hour, 28-volt battery is slightly less than a conventional 18-volt NiCd battery pack.
Fade-free power: Instead of the gradual but noticeable power decline users expect as a NiCd or NiMH battery pack discharges, the V28 Lithium-Ion cells maintain consistent power. Power doesnt drop off drastically until the very last hole or cut.
Corded tool power: The higher 3.0 amp-hr. output and 28 volts of muscle mean you can use V28 tools that in the past could only be available as corded. For example, the hammer-drill puts out 600 in.-lbs. of torque, and the circular saw cuts at 4,200 rpm, which is much closer to corded saw speeds than the 3,200 rpm found on NiCd models.
(0 ) Reviews:
No reviews yet. Be the first to review!